Step-by-Step Guide: How to Strategically Place Troops in Siege Machines for Successful Attacks

If you're a Clash of Clans player, then you know how important it is to have siege machines when you're attacking other players' bases. These powerful machines can help you break through even the toughest defenses and take down your opponent's base with ease. But how do you put troops in siege machines? It may seem like a simple task, but there are a few things you need to know if you want to use these machines effectively. So grab your popcorn and get ready for some hilarious tips on how to put troops in siege machines!

First things first, you need to make sure you have a siege machine available to use. If you don't have one yet, then you need to upgrade your Town Hall to level 12 and build the Siege Workshop. Once you have a siege machine, you can start thinking about which troops you want to put inside.

Now, before you go putting troops inside your siege machine willy-nilly, you need to consider what kind of siege machine you're using. There are three types of siege machines: the Wall Wrecker, the Battle Blimp, and the Stone Slammer. Each machine has its own strengths and weaknesses, so you need to choose your troops accordingly.

For example, if you're using a Wall Wrecker, you'll want to put in troops that can take advantage of the hole it creates in the wall. This might include units like Giants, Hog Riders, or even a P.E.K.K.A. On the other hand, if you're using a Battle Blimp, you'll want to put in troops that can survive being dropped into the middle of a base, like Balloons or Dragons.

Once you've chosen your troops, it's time to actually put them in the siege machine. To do this, simply select the siege machine and tap the Edit button. From there, you can choose which troops you want to put inside. You can also choose how many troops you want to put in, although this will depend on the size of your siege machine.

Now, here's where things get a little tricky. You need to make sure you're putting the right troops in the right compartment of the siege machine. Each machine has two compartments: the main compartment and the secondary compartment. The main compartment is where your troops will be dropped when the machine reaches its target, while the secondary compartment is only used if the main compartment is destroyed.

So, for example, if you're using a Wall Wrecker, you'll want to put your strongest troops in the main compartment, since that's where they'll be dropped. You might put some weaker troops in the secondary compartment, just in case the main compartment is destroyed before it reaches the wall.

Once you've put your troops in the siege machine, it's time to deploy it. You can do this just like you would any other troop. Simply select the siege machine and drag it to where you want it to go. Once it reaches its target, your troops will be dropped and the siege machine will start wreaking havoc on your opponent's base!

Of course, putting troops in siege machines is just the beginning. To truly master these powerful machines, you'll need to practice and experiment with different troop combinations. But with these tips, you'll be well on your way to dominating the battlefield in Clash of Clans!

Introduction

Siege machines in Clash of Clans are essential when it comes to attacking enemy bases. However, adding troops to the siege machine can be a daunting task for new players. In this article, we will give you some tips on how to put troops in the siege machine without any hassle.

The Basics

Before we get into the specifics, let's talk about the basics. Siege machines are powerful war machines that can deal massive damage to enemy bases. They are designed to carry a group of troops into battle, making them an excellent tool for taking down walls and defenses.

Choosing the Right Troops

When it comes to putting troops in the siege machine, it's crucial to choose the right ones. You want to pick troops that can deal damage quickly and efficiently. Some of the best options include giants, wizards, and archers. These troops can take down defenses and clear the way for your other troops to attack.

Preparing Your Army

Before you start putting troops in the siege machine, you need to prepare your army. Make sure you have enough troops to fill the siege machine and take down the enemy base. It's also important to have a solid strategy in place so that you can make the most out of your siege machine.

Putting Troops in the Siege Machine

Now that you're ready to put troops in the siege machine, here's how to do it:

Step 1: Select the Siege Machine

First, select the siege machine you want to use. You can do this by tapping on the siege machine icon in your army camp. Once you've selected it, you can see how many troops it can carry.

Step 2: Tap on the Siege Machine

Next, tap on the siege machine to open it up. You'll be able to see how many troops you've already added and how many more you can add.

Step 3: Select Your Troops

Now it's time to select the troops you want to add to the siege machine. You can choose any combination of troops that you like, but make sure they're the right ones for the job.

Step 4: Add Your Troops

Once you've selected your troops, drag and drop them into the siege machine. You can add as many troops as you want, as long as the siege machine can carry them.

Step 5: Close the Siege Machine

Finally, close the siege machine by tapping on the X in the top right corner. Your troops will now be safely stored inside, ready to take on the enemy base.

Tips and Tricks

Here are some additional tips and tricks to help you make the most out of your siege machine:

Tip 1: Use Spells

Spells can be a powerful tool when used in conjunction with siege machines. Consider using spells like Rage or Freeze to boost your troops' damage or slow down enemy defenses.

Tip 2: Use Your Heroes

Your heroes can also be a great addition to your siege machine. They can deal massive damage and take out defenses quickly, making them an excellent choice for taking down walls and clearing the way for your other troops.

Tip 3: Use Your Siege Machine Wisely

Finally, make sure you use your siege machine wisely. Don't waste it on small bases or weak defenses. Save it for when you need to take down a tough enemy base or break through a heavily fortified area.

Conclusion

Putting troops in the siege machine may seem daunting at first, but with these tips and tricks, you'll be a pro in no time. Remember to choose the right troops, prepare your army, and use your siege machine wisely. Good luck, and happy raiding!

How to Put Troops in Siege Machine: A Humorous Guide

Troops in a toy car? No thanks. Let's talk about the real deal - putting troops in a siege machine. If you're a novice in the art of warfare, fear not. We've got you covered with our step-by-step guide on how to put troops in a siege machine. Just remember to buckle up and keep your sense of humor intact.

Step 1: Find a catapult. Step 2: No, seriously, find a catapult.

The first step is crucial - finding a catapult. You can't just use any old slingshot or trebuchet. A proper siege machine requires a catapult. And if you can't find one, then why are you even attempting this? Go back to playing with your toy cars.

Do NOT attempt to shove troops into the small hole in the front of the machine.

This may seem like a no-brainer, but you'd be surprised how many rookies make this mistake. The small hole in the front of the machine is not for troops. It's for projectiles. So, unless you want your troops to be launched into the air like a flaming ball of fire, do not attempt to shove them in there.

If at first you don't succeed, try again with fewer archers and more giants.

Let's face it - not every attempt at launching troops will be successful. Sometimes, you'll miss your target or fail to launch your troops altogether. But don't give up hope. Just adjust your strategy. Maybe you need fewer archers and more giants. Or maybe you need to aim a little higher. Keep trying until you get it right.

Remember to buckle up, troops. Safety first!

We can't stress this enough - safety first! Before launching your troops, make sure they are securely fastened in the machine. You don't want them flying out mid-launch and landing in enemy territory. And don't forget to wear your seatbelt, err...armor.

Warning: Siege machines do not come equipped with a bathroom.

This is a little-known fact, but siege machines do not come equipped with a bathroom. So, if you're planning on taking a long journey in the machine, be prepared to hold it in. Or bring a bucket. Just don't expect any privacy.

Note to self: Do not put skunks in the siege machine. Trust us on this one.

Some troops may seem like a good idea at the time, but trust us on this one - do not put skunks in the siege machine. The smell will linger for days, and your troops will never forgive you. Stick to more traditional troops like knights and archers.

Find yourself a good spotter. Preferably not a goblin who has had too much ale.

A good spotter is essential to the success of your mission. They can help you aim and adjust your trajectory. But make sure you choose your spotter wisely. You don't want a goblin who's had too much ale trying to guide your launch. Stick to someone sober and reliable.

Don't worry, troops. The machine has a cup holder for your potions.

Just because you're in a siege machine doesn't mean you can't enjoy the little things in life - like a refreshing potion. The machine comes equipped with a cup holder, so you can quench your thirst while launching your troops. Just make sure you don't spill it all over the controls.

When in doubt, just throw the whole army in. What's the worst that could happen?

If all else fails, just throw the whole army in. What's the worst that could happen? You may not hit your target, but at least you'll go down in history as the commander who launched the entire army in a single siege machine. And that's something to be proud of.

In conclusion, putting troops in a siege machine may seem like a daunting task, but with a little humor and some common sense, you can do it. Just remember to find a catapult, buckle up, and choose your troops wisely. And if all else fails, just throw the whole army in.

How to Put Troops in Siege Machine

Introduction

The Basics

Step 1: Select your Siege Machine

Step 2: Choose your Troops

Step 3: Load the Troops

Step 4: Deploy the Siege Machine

Conclusion

How to Put Troops in Siege Machines: A Guide for Clueless Players

Congratulations, you have reached the end of this guide! If you are still reading this, it means you are either really interested in learning how to put troops in siege machines or you just can't get enough of my witty writing style. Either way, I am flattered and grateful for your attention.

Now, let's talk about the real reason why you are here: you want to know how to put troops in siege machines like a pro. Well, my friend, I have good news and bad news for you. The good news is that it's not rocket science. The bad news is that if you don't do it right, you might end up looking like a clueless noob in front of your clan mates.

So, without further ado, let me give you a step-by-step guide on how to put troops in siege machines. But before we dive into the nitty-gritty details, let me remind you of one important thing: practice makes perfect. Don't expect to nail it on your first try. It takes time, patience, and a lot of trial and error.

Step 1: Build a Siege Machine

This might sound obvious, but you need to build a siege machine first before you can put troops in it. Siege machines are built in the Siege Workshop, which is unlocked at Town Hall 12. There are four types of siege machines: Wall Wrecker, Battle Blimp, Stone Slammer, and Siege Barracks. Each type has a different function, so choose wisely depending on your strategy.

Step 2: Select the Siege Machine

Once you have built a siege machine, you need to select it from your army list. To do this, tap on the Army button in the bottom left corner of your screen, then tap on the siege machine icon.

Step 3: Tap on the Siege Machine

After selecting the siege machine, tap on it again to open the deployment menu. This is where you can put troops in the siege machine.

Step 4: Choose the Troops

Tap on the troop icon to open the troop selection menu. You can choose up to two different types of troops to put in the siege machine. Make sure you choose the right troops depending on your strategy.

Step 5: Put Troops in the Siege Machine

Once you have selected the troops, drag and drop them into the slots in the deployment menu. You can put up to 25 troops in a siege machine, depending on its capacity.

Step 6: Deploy the Siege Machine

After putting troops in the siege machine, tap on the Deploy button to deploy it. The siege machine will move towards the nearest defensive structure and release the troops when it reaches the target.

Step 7: Watch the Magic Happen

Sit back and watch the magic happen. The troops inside the siege machine will wreak havoc on the enemy base, clearing the way for your main army.

Step 8: Celebrate Your Victory

If you followed these steps correctly, you should have successfully put troops in a siege machine and used it to crush your enemies. Congratulations, you are now officially a siege machine master!

Wrapping Up

I hope you found this guide helpful and entertaining. Remember, putting troops in siege machines is not as complicated as it seems. All you need is a bit of practice and a lot of courage. Don't be afraid to experiment with different troop compositions and strategies. Who knows, you might come up with the next big thing in Clash of Clans.

Thank you for reading, and happy sieging!

People Also Ask: How To Put Troops In Siege Machine

Can troops be placed in siege machines?

Yes, troops can be placed in siege machines. This feature was introduced in the game to make the gameplay more exciting and challenging. By placing troops in siege machines, players can launch a devastating attack on their opponent's base.

How do I put troops in my siege machine?

Putting troops in your siege machine is a simple process. Follow these steps:

1. Select your siege machine.
2. Click on the Load Troops button.
3. Select the troops you want to load into the machine.
4. Click on the Confirm button.

How many troops can be put in a siege machine?

The number of troops that can be put in a siege machine depends on the level of the machine. The higher the level of the machine, the more troops it can carry. At the maximum level, a siege machine can carry up to 25 troops.

What are the benefits of putting troops in a siege machine?

Putting troops in a siege machine has several benefits:

• Increased mobility: A siege machine with troops can move faster and cover more ground.
• Enhanced attack power: Troops in a siege machine can deal more damage to enemy buildings and defenses.
• Improved defense: Siege machines with troops can defend themselves better against enemy attacks.

So go ahead and load up your siege machines with troops. It's time to crush your opponents with a powerful and unstoppable army!